click photo fo enlarge

SPARK PLUG WRENCH

click photo fo enlarge

TORX ANGLE KEY SET

click photo fo enlarge

TORX BIT AND HOLDER SET

A Torx bits set with holder, for use with a 3/8 sq. drive. Draper expert quality, made from silicon steel, hardened and tempered. Contents: T20, T25, T30, T4, T45, T50 x 30mm long.

Code DR1 £4.99 (includes VAT)

12793

click photo fo enlarge

OIL FILTER STRAP WRENCH

Heavy duty webbing strap to give a positive grip for removing the oil filter. Tightens as it is removed using either a square drive, 3/8” or 1/2” or a spanner 21mm or 13/16 AF.

Code DR4 £9.25 (includes VAT)

56137

click photo fo enlarge

DRAPER SILVERDRIVE 42 PIECE 1/2” DRIVE SOCKET SET

Excellent 42 piece 1/2” drive set with both metric and AF size sockets. Manufactured from chrome vanadium steel, hardened, tempered and chrome plated for corrosion protection.
Contents:
• 17 x 12 point sockets size: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24 and 27mm
• 11 x 12 point sockets size: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16 and 1" AF
• 6 x 12 point deep sockets size: 10, 11, 12, 13, 14 and 17mm
• 3 x spark plug sockets: 10, 12, 14mm
• reversible ratchet
• 2 extension bars size: 125 and 250mm
• tee bar head / 3/8"(F) x 1/2"(M) converter
• universal joint

Code DR9 £29.75 (includes VAT)

Sale price now only £29.75
(limited stock)

29101

click photo for more pictures

AXLE STANDS

Two tonne (2000kg) capacity axle stands, lifting range 280mm to 380mm (11” to 15”).

Code TO1 £10.00 for set of 2 stands (includes VAT)

Sale price now only £10.00

click photo for more pictures

GCR05 FAULT DIAGNOSTICS OBDII / EOBD CODE READER

An inexpensive and useful fault code reader. Very simple to use, just plug it into the diagnostic socket, inside the PT near the accelerator pedal, and switch on the ignition to read the codes on the tool’s display. The accompanying handbook gives instructions and shows what faults are indicated by each code. Once the fault is fixed, the code reader can be used to erase the code and the engine-check light .
Ideal for the PT owner, it can also be used to check almost any make of modern car. For all PT Cruisers 2000-2010 - petrol and diesel.

Code CR5 £39.95 (includes VAT)

click photo for more pictures

GCR25 FAULT DIAGNOSTICS OBDII/EOBD CODE READER

Most functions on modern cars like the PT Cruiser are electronically monitored and should a fault occur it will stored in the car’s computer as a 5 digit code. This very useful tool will read the fault codes applying to the engine, transmission and emissions and display the fault on the large display. Once the fault is fixed, the code reader can be used to erase the code and the engine-check light . As well as displaying freeze-frame data (a snapshot view of the various sensor values when the actual fault occurred) it also will display live data too. This feature is very useful in helping to find hard to locate or intermittent faults as car can be driven with the GCR25 plugged in. If a fault should occur, the GCR25 will either display it or give readouts of any sensor malfunctions/voltages etc. (For obvious safety reasons, a passenger would be needed to read the display). Very simple to use, just plug it into the diagnostic socket, inside the car near the accelerator pedal, and switch on the ignition. If there is, or has been, a fault it will be displayed. For example, I removed the lead between the coil and spark plug No.1 on my PT Cruiser. The reader displayed “Ignition coil secondary circuit A malfunction” (A being the No. 1 cylinder.) Ideal for the PT owner, it can also be used to check almost any make of modern car. Package contents: GCR25 Code Reader with plug in lead and user manual Soft carry case and PC cable for updating software. For all PT Cruisers 2000 up for petrol and 2002 up for diesel PT Cruisers.

Code CR25 £99.00 (includes VAT)